INDUSTRY PERFORMANCE STANDARDS COMPLIANCE

MANUFACTURER STIPULATES COMPLIANCE WITH STATIC AIR PRESSURE TEST   ASTM E 330; DADE COUNTY BUILDING CODE COMPLIANCE PROTOCOL PA 202   +76 PSF   -76 PSF 3'-0" X 6'-8" WATER RESISTANCE TEST   ASTM E331; DADE COUNTY BUILDING CODE COMPLIANCE PROTOCOL PA 202   OUTSWING 8.25 PSF FORCED ENTRY TEST   ASTM F842; DADE COUNTY BUILDING CODE COMPLIANCE PROTOCOL PA 202 IMPACT TEST   DADE COUNTY BUILDING CODE COMPLIANCE PROTOCOL PA 201 CYCLIC WIND LOAD TEST   DADE COUNTY BUILDING CODE COMPLIANCE PROTOCOL PA 203   +76 PSF   -76 PSF 3'-0" X 6'-8" NATIONAL STANDARDS OF CANADA   CGSB 82.5-M88 DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT   USE OF MATERIALS BULLETIN NO. 89; AAMA 1702.2 FIRE RESISTANCE TEST   ASTM E152; CSFP 43.7; CAN 4-S104 (ULS S104); NFFPA 252; UBC 43-2; UL 10(B); NFPPA 80 90 MINUTE 3'-0" X 6'-8" AIR INFILTRATION TEST   ANSI/ISDI 101; NFRC 400; ASTM E283 ACOUSTICAL PERFORMANCE TEST   ANSI/ISDI 103; ASTM E90; ASTM E413 STC 26 WATER PENETRATION TEST   ANSI/ISDI 104; ASTM E331 PHYSICAL ENDURANCE TEST   ANSI A151.1; ISDI 105 LEVEL C THERMAL PERFORMANCE TEST   ANSI/ISDI 107; ASTM C236 NFRC 100 0.18 WITHOUT GLASS 0.25 WITH ½" I.G. QTR LT 0.33 WITH ½" I.G. HALF LT 0.42 WITH ½" I.G. FULL LT FINISHING INSTRUCTIONS   FOR DOOR TO BE WARRANTEED, DOOR MUST BE PAINTED OR STAINED AND TOP COATED WITHIN 30 DAYS NOTE: ALL DOORS ARE TO BE ASSEMBLED IN ACCORDANCE WITH PREM-330 NOTE: ALL DOORS ARE TO BE INSTALLED IN ACCORDANCE WITH ANSI/ISDI 102. FIRE RATING VOID IF GLASS LITES ARE INSTALLED Entry Systems 2000557   3/98